AQUOLAC FREECURE Liquid compound is manufactured by blending synthetic waxes with other selected chemicals to form non-toxic emulsion. It prevents evaporation of water particles from the concrete surface by forming a thin membrane, hence enabling to cure it without the further addition of water.

Uses:
AQUOLAC FREECURE is used on freshly cast concert’s or newly exposed concrete surface to form a temporary membrane which will retain sufficient moisture for affective curing. It is useful for large area of concrete such as pavement, runways, bridge and vertical or sloping surface as chimneys, towards, canal linings, columns and beams where water curing is difficult. The membrane with the passage of time breakdown after which the surface can be painted after removing the loose particles.

Applications:
AQUOLAC FREECURE should be applied after disappearance of water seen from the surface. If the concrete has already lost some of its surface water them wet down the surface before application.
It can be applied by low pressure spray or Brush. It covers area approximately 5 to 6m² Ltr.